1-800-537-6732
Welcome!

section

CRD-005 Setpoint Relay Switch

Be the first to review this product

• Programmable settings for either current or voltage input, threshold levels, and over-or under-relay alarms
• Internal DIP-switches may be set for under-alarm or overalarm relay operation
• Factory setting “0-1mA and over-range alarm mode”
• Lid-mounted two-digit numerical push-button switch calibrated as percent of full scale with a threshold range of 1-99%
• Red LED lamp lights to indicate when threshold level has been obtained
SKU: CRD-005
$225.00

Product Specifications
    Display Type No
    Core Type Direct
    Accuracy Rating ±2 digits
    Agency Approval No
    Mounting Panel
    Measurement No
    Output Relay Output
    Frequency No
    Current Input 0-1mAdc
    System Configuration No
    Family CRD
Product Description

    Details

    The CRD series setpoint relay is designed when the signal is set for UNDER RANGE, the output relay will energize when instrument power is applied and the current is above the setpoint threshold. It will remain in a “Fail Safe” mode until either the input current drops below the setpoint threshold or instrument power is removed. For OVER RANGE the output relay will energize when instrument power is applied and will remain in a “Fail Safe” mode until either the instrument power is removed or the input current exceeds the set point threshold level.
Product's Review

    Write Your Own Review

    You're reviewing: CRD-005 Setpoint Relay Switch

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab