CTA201LX5 Process Signal Conditioner

Be the first to review this product

  • Excitation current and analog output for CTL series Hall-effect current sensor
  • Available in both Direct and RMS outputs
  • Calibrated to output of specific CTL model

Product Specifications
    Accuracy Rating ±0.1% F.S.
    Mounting Panel
    Measurement DC/AC
    Output 0-5V
    Frequency DC-5KHz
    Family CTA
Product Description


    The CTA Signal Conditioner provides the excitation current (instrument power) that the CTL Hall-effect sensor requires, as well as amplifying the low-level (mV) signal into a more typical signal. The CTA is calibrated to the output of the specific CTL selected for the application. Each CTA model has a specific input range (mV) which corresponds to the output of the CTL. The CTA family has two different types; Direct and RMS. Direct models provide an isolated output that is directly proportional to the amplitude and frequency of the input signal. If the input signal is AC, then the output signal is AC. If the input signal is DC, then the output signal is DC. The RMS output models provide an output which is directly proportional to the RMS of the input signal. The output is DC regardless of whether the input is AC or DC. Each type has four output options: 1mAdc, 4-20mAc, 10Vdc, or 5Vdc. DC instrument power options are available from 12 to 48Vdc.
Product's Review

    Write Your Own Review

    You're reviewing: CTA201LX5 Process Signal Conditioner

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab